How to connect two TVs with an HDMI cable

How to connect two TVs with an HDMI cable

most of the people realize a way to truly join an HDMI-like minded device to a tv if you want to show the device’s video and audio outputs. but, using HDMI cables to attach two televisions (or video display units) collectively if you want to display the equal tool’s output is a much greater extraordinary project. however, it isn’t always impossible.

before putting off in this undertaking, you may want to gather some more device. you may need to buy what is called an hdmi splitter. however, please notice, that hdmi splitters are not the same as hdmi routing switchers, which are capable of changing what outputs are despatched to precise shows. this does require some quick studies, as you should ensure that the splitter is well matched with the televisions’ resolution, refresh price and coloration depth. with this in mind, you also want to be sure that your hdmi cables are compatible with the aforementioned specs as well.

in case you try to use cables or a splitter that isn’t well matched, you could revel in lessened decision or without a doubt a weaker sign. the splitter selection that you may pick out from goes to be dependent on the wide variety of displays which you intend to output the signal to.

but, in case you intend to handiest show the output to two shows, there are numerous affordable options. as an example, the active 4k hdmi splitter is able to outputting signals to two separate presentations with up to 4k decision, but, as stated earlier than, your cables will must 4k compatible as nicely.

once you have got acquired the vital splitter and cables, all you need to do is about it up. maximum splitters come with the gadget and an ac adapter. in reality join your splitter to the ac adapter and plug the adapter into the wall. subsequent, you need to run an hdmi succesful from the output device, whether it’s a laptop, a dvd participant, a blu ray player or a game console, into the hdmi splitter.

once the connection is made, it’s far then vital to run more hdmi cables from the opposite aspect of the splitter to each display that you need the sign to output to. once those very last connections are made, ensure the device this is outputting the sign to the splitter is powered on.

next, activate every of the displays and use the input settings to set the displays to the enter that corresponds to the port in which you plugged inside the hdmi cable. if the whole thing is attached effectively, the signal from the output device need to seem. if the display seems small or zoomed in, you can should adjust the display’s resolution settings to make certain that it matches the output decision of the output device.

with the resolutions set, the whole lot need to be adjusted well. it should be saved in thoughts that, with this set-up, the shows will basically act as same pics of every other, as the video signal is being managed through the output device and now not the displays.

however, if the output tool is a computer, it is viable to alternate your settings to have every display act as its very own person, but extended, laptop display. lastly, if some thing does no longer work along with your setup, it’s miles advocated that you contact the cable, splitter, output device, or display producer for technical assistance, as any of those components should malfunction.